Difference between revisions of "Strings"

From CVC4
Jump to: navigation, search
Line 362: Line 362:
 
  (int.to.str i)
 
  (int.to.str i)
 
where i is an integer term. It returns the corresponding string if i is a natural number; otherwise, it returns an empty string.
 
where i is an integer term. It returns the corresponding string if i is a natural number; otherwise, it returns an empty string.
−
 
−
=Extensions=
 
−
Together with other engine in CVC4, we can extend new functionality in the theory of strings. For example,
 
−
  (define-fun fun1 ((?x String) (?s String)) Bool
 
−
    (or (= ?x ?s)
 
−
        (> (str.len ?x) (str.len ?s))
 
−
    ))
 
−
Quantifiers over bounded Integers (with strings in the body) are supported in the experimental mode; however, quantifiers over strings are still under development.
 
  
 
=Limitations=
 
=Limitations=

Revision as of 10:31, 11 December 2018

This page describes support for the theory of strings in CVC4.

Syntax

This document focuses on input written in SMT-LIB 2 format.

We highly recommend that users use SMT-LIB Version 2.5 or greater, instead of Version 2.0. The major difference is in the definition of escape sequences for string literals.

The syntax below is for CVC4 version > 1.4. Version 1.3 has only partial support for syntax in this document.

Currently, the string solver supports string constants over a set of characters limited to the printable ASCII characters. Other characters must be encoded with escape sequences. For arbitrary alphabets, we plan to provide later a separate solver for a theory of parametric sequences.

To use the string solver it is important to declare initially (using the set-logic command) an SMT-LIB logic that includes strings. Since the SMT-LIB standard does not have an official theory of strings and related logics yet (although one is in development http://smtlib.cs.uiowa.edu/theories-UnicodeStrings.shtml), the logic and operator names described below are tentative and might change later.

The basic logic is QF_S consisting of quantifier-free formulas over just the theory of strings, e.g.: 

 (set-logic QF_S)

For string applications that require reasoning about length, the logic should be extended to also include linear integer arithmetic: 

 (set-logic QF_SLIA)

A summary of the relevant syntax for strings in the SMT2, CVC, and API is below. Note that regular expressions are not yet supported in the CVC format. More details on these operators can be found later in this page.

CVC language SMTLIB language C++ API
Logic string Not needed preappend "S" for strings preappend "S" for strings
(set-logic QF_SLIA) smt.setLogic("QF_SLIA");
String Sort STRING String em.stringType();
String literals "abcdef" "abcdef" em.mkConst( ::CVC4::String("abcdef") );
Concatenation CONCAT( X1, ..., Xn ) (str.++ X1 ... Xn ) em.mkExpr(kind::STRING_CONCAT, X1, ..., Xn);
Length LENGTH( x ) (str.len X) em.mkExpr(kind::STRING_LENGTH, X);
String contains CONTAINS( X, Y ) (str.contains X Y) em.mkExpr(kind::STRING_STRCTN, X, Y);
Index of INDEXOF( X, Y, N ) (str.indexof X Y N) em.mkExpr(kind::STRING_STRIDOF, X, Y, N);
Replace REPLACE( X, Y, Z ) (str.replace X Y Z) em.mkExpr(kind::STRING_STRREPL, X, Y, Z);
Replace REPLACEALL( X, Y, Z ) (str.replaceall X Y Z) em.mkExpr(kind::STRING_STRREPLALL, X, Y, Z);
Substring SUBSTR( X, Y, Z ) (str.substr X Y Z) em.mkExpr(kind::STRING_SUBSTR, X, Y, Z);
Prefix of PREFIXOF( X, Y ) (str.prefixof X Y) em.mkExpr(kind::STRING_PREFIX, X, Y);
Suffix of SUFFIXOF( X, Y ) (str.suffixof X Y) em.mkExpr(kind::STRING_SUFFIX, X, Y);
String to Integer STRING_TO_INTEGER( X ) (str.to.int X) em.mkExpr(kind::STRING_STOI, X);
Integer to String INTEGER_TO_STRING( X ) (int.to.str X) em.mkExpr(kind::STRING_ITOS, X);
String to Integer (16-bit) STRING_TO_UINT16( X ) (str.to.u16 X) em.mkExpr(kind::STRING_STOU16, X);
Integer (16-bit) to String UINT16_TO_STRING( X ) (u16.to.str X) em.mkExpr(kind::STRING_U16TOS, X);
String to Integer (32-bit) STRING_TO_UINT32( X ) (str.to.u32 X) em.mkExpr(kind::STRING_STOU32, X);
Integer (32-bit) to String UINT32_TO_STRING( X ) (u32.to.str X) em.mkExpr(kind::STRING_U32TOS, X);
Character at CHARAT( X, N ) (str.at X N) em.mkExpr(kind::STRING_CHARAT, X, N);
Regular expression sort n/a RegExp em.regExpType();
Membership in regular expression n/a (str.in.re X R) em.mkExpr(kind::STRING_IN_REGEXP, X, R);
String to regular expression n/a (str.to.re X) em.mkExpr(kind::STRING_TO_REGEXP, X);
Regular expression concatenation n/a (re.++ R1 ... Rn) em.mkExpr(kind::REGEXP_CONCAT, R1, ..., Rn);
Regular expression union n/a (re.union R1 ... Rn) em.mkExpr(kind::REGEXP_UNION, R1, ..., Rn);
Regular expression intersection n/a (re.inter R1 ... Rn) em.mkExpr(kind::REGEXP_INTER, R1, ..., Rn);
Regular expression Kleene star n/a (re.* R) em.mkExpr(kind::REGEXP_STAR, R);
Regular expression plus n/a (re.+ R) em.mkExpr(kind::REGEXP_PLUS, R);
Regular expression option n/a (re.opt R) em.mkExpr(kind::REGEXP_OPT, R);

We refer to all functions apart from string length and string concatenation as extended functions in the following.

Options

The extended functions in the theory are disabled by default, even in the ALL_SUPPORTED logic. To enable them, use: 

 (set-option :strings-exp true)

The solver can be run in finite model finding mode which guarantees termination for satisfiable problems where all strings are interpreted with small lengths. This mode is disabled by default. To enable it: 

 (set-option :strings-fmf true)

Note that in this mode the solver can be much slower than in default mode, so we recommend it as a fall back option when the default mode fails to find a solution with a reasonably large timeout.

Currently, the solver's theory is based on an alphabet consisting of the 256 characters from (8-bit) Extended ASCII. Since there are several versions of Extended ASCII, we allow string constants to contain only printable US ASCII characters, i.e. those with numerical value between 0x20 and 0x7e in the standard US ASCII encoding. To limit the alphabet of the strings solver to the 128 printable ASCII characters, use: 

 (set-option :--strings-print-ascii)

Note: The alphabet will change to the one prescribed by the SMT-LIB standard once there is one.

Escape Sequences in String Constants

String constants are denoted by SMT-LIB string literals consisting of sequences of printable characters delimited by double-quotes (").

We support escape sequences used in most programming languages to represent non-printable characters.

\0 … \9 represents ASCII character 0 … 9, respectively
\a, \b, \e, \f, \n, \r, \t, \v represents its corresponding ASCII character (C++ convention)
\ooo encodes a single ASCII character where ooo consists of exactly three digits in the octal encoding of the character (from 0 to 377). For example, \101 represents A. Note: going beyond value 377 might give unexpected results. For instance, \437 will be translated in the two-character string #7.
\xNN encodes a single ASCII character, where NN consists of exactly two digits in the exadecimal encoding of the character.

The backslash character (\) is silently ignored when it is followed by a sequence of characters not recognized as an escape sequence. For example, \$ , say, is parsed as if it was just $.

When CVC4 outputs a string constant, a non-printable/extended ASCII character is printed in the exadecimal format \xNN, except for the character denoted by the escape sequences \a, \b, \e, \f, \n, \r, \t, \v, which are printed using those escape sequences.

Note: These escape sequences are specific to string constants in the theory of strings. They are 'not' escape sequences in SMT-LIB 2 per se. SMT-LIB 2.5 has only one escape sequence for string literals: "", which denotes the double quotes character. This means that a string literal like "a""c" is read by the solver as the string constant consisting of the characters a, ", and c. The same constant can be entered as "a\042c" or "a\x22c".

Theory Signature

To define a string variable, i.e., a free string constant: 

 (declare-fun x () String)

Alternatively: 

 (declare-const x () String)

String Concatenation: 

 (str.++ s1 s2 ... sn)

where s1, s2, ..., and sn are string terms. String concatenation takes at least 2 arguments.

String Length: 

 (str.len s)

where s is a string term.

Regular Expression Memberships

Membership Constraint: 

 (str.in.re s r)

where s is a string term and r is a regular expression.

String to Regular Expression Conversion: 

 (str.to.re s)

where s is a string term. The statement turns a regular expression that only contains a string s.

Regular Expression Concatenation: 

 (re.++ r_1 r_2 ... r_n)

where r_1, r_2, ..., r_n are regular expressions.

Regular Expression Alternation: 

 (re.union r_1 r_2 ... r_n)

where r_1, r_2, ..., r_n are regular expressions. re.or is for releases before March, 2014.

Regular Expression Intersection: 

 (re.inter r_1 r_2 ... r_n)

where r_1, r_2, ..., r_n are regular expressions. re.itr is for releases before March, 2014.

Regular Expression Kleene-Star: 

 (re.* r)

where r is a regular expression.

Regular Expression Kleene-Cross: 

 (re.+ r)

where r is a regular expression.

Regular Expression Option: 

 (re.opt r)

where r is a regular expression.

Regular Expression Range: 

 (re.range s t)

where s, t are single characters in double quotes, e.g. "a", "b". It returns a regular expression that contains any character between s and t.

Regular Expression Loop: 

 (re.loop r l u)

where r is a regular expression, l is a non-negative constant integer, and u is a non-negative constant integer. It returns a regular expression that contains at least l repetitions of r and at most u repetitions of r. If l >= u, it returns exactly l repetitions of r.

Regular Expression Loop-2: 

 (re.loop r l)

where r is a regular expression, and l is a non-negative constant integer. It returns a regular expression that contains at least l repetitions of r.


The Empty Regular Expression: 

 re.nostr

The Regular Expression that contains all characters: 

 re.allchar

Extended Functions

Following functions are available when using the --strings-exp option.

Character in String: 

 (str.at s i)

where s is a string term and i is an integer. The index is starting from 0.

Sub-String: 

 (str.substr s i j )

where s is a string term, i and j are integers.

String Char-At: 

 (str.at s i)

where s is a string term and i is an integer term. i is the position. If i is negative or greater than or equal to the length of s, then (str.at s i) returns the empty string.

String Sub-string: 

 (str.substr s i j)

where s is a string term and i, j are integer terms. i is the starting position, and j is the offset. If i is negative, it returns the empty string; otherwise, it returns the substring (of s) that begins at the specified index i and extends to the length j (or to the last character of s if the length of s is shorter than i + j).

String Contain: 

 (str.contains s t)

where s and t are string terms. It returns true if the string s contains the string t. This function determines whether the string t can be found within the string s, returning true or false as appropriate.

String IndexOf: 

(str.indexof s t i)

where s is a string, t is a non-empty string and i is a non-negative integer. This function returns the position of the first occurrence of the specified value t in the string s after the index i. It returns -1 if the value to search for does not occur.

String Replacement: 

(str.replace s t1 t2)

where s, t1 and t2 are string terms, t1 is non-empty. This function searches the string s for the specified value t1, and returns a new string where the first occurrence of the specified value t1 is replaced by the string t2.

String PrefixOf: 

(str.prefixof s t)

where s and t are string terms. It returns true if the string s is a prefix of the string t.

String SuffixOf: 

(str.suffixof s t)

where s and t are string terms. It returns true if the string s is a suffix of the string t.

String To Integer Conversion: 

(str.to.int s)

where s is a string term. It returns the corresponding natural number if s is string of digits; otherwise, it returns -1.

Integer To String Conversion: 

(int.to.str i)

where i is an integer term. It returns the corresponding string if i is a natural number; otherwise, it returns an empty string.

Limitations

The decidability of this theory is unknown. For satisfiable problems (without extensions), our solver is sound, complete and terminating in the FMF mode (although the FMF mode will be slower than the default mode in general). For unsatisfiable problems, termination is not guaranteed; however, users can tune the options for termination.

The current version of the solver supports ASCII characters only. We might move on to UNICODE in future versions.

Examples

Find an assignment for x, where x."ab"="ba".x and the length of x equals to 7. 

 (set-logic QF_S)
 
 (declare-fun x () String)
 
 (assert (= (str.++ x "ab") (str.++ "ba" x)))
 (assert (= (str.len x) 7))
 
 (check-sat)

Find assignments for x and y, where x and y are distinct and their lengths are equal. 

 (set-logic QF_S)
 
 (declare-fun x () String)
 (declare-fun y () String)
 
 (assert (not (=  x y)))
 (assert (= (str.len x) (str.len y)))
 
 (check-sat)

Find assignments for x and y, where x.y != y.x. 

 (set-logic QF_S)
 
 (declare-fun x () String)
 (declare-fun y () String)
 (assert (not (= (str.++ x y) (str.++ y x))))
 
 (check-sat)

Find a model for x, y and z, where x."ab".y=y."ba".z and z=x.y and x."a"!="a".x. 

 (set-logic QF_S)
 
 (declare-fun x () String)
 (declare-fun y () String)
 (declare-fun z () String)
 
 (assert (= (str.++ x "ab" y) (str.++ y "ba" z)))
 (assert (= z (str.++ x y)))
 (assert (not (= (str.++ x "a") (str.++ "a" x))))
 
 (check-sat)

Find a model for x and y, where both x and y are in the RegEx (a*b)* and they are different but have the same length. 

 (set-logic QF_S)
 (set-option :strings-fmf true)
 
 (declare-fun x () String)
 (declare-fun y () String)
 
 (assert
   (str.in.re x
      (re.* (re.++ (re.* (str.to.re "a") ) (str.to.re "b") ))))
 (assert (str.in.re y
      (re.* (re.++ (re.* (str.to.re "a") ) (str.to.re "b") ))))
 
 (assert (not (= x y)))
 (assert (= (str.len x) (str.len y)))
 
 (check-sat)

API

More details can be found in the Tutorials.

C++

The example can be found in examples/api/strings.cpp.

If setting the logic, use "S" to enable theory of strings. 

 smt.setLogic("S");

To create a string type, call mkSetType in the ExprManager. 

 Type string = em.stringType();

Make some string literals: 

 // std::string
 std::string std_str_ab("ab");
 // CVC4::String
 CVC4::String cvc4_str_ab(std_str_ab);
 CVC4::String cvc4_str_abc("abc");
 // String constants
 Expr ab = em.mkConst(cvc4_str_ab);
 Expr abc = em.mkConst(CVC4::String("abc"));

Make some string variables: 

 Expr x = em.mkVar("x", string);
 Expr y = em.mkVar("y", string);
 Expr z = em.mkVar("z", string);

Make some string constraints: 

 // String concatenation: x.ab.y
 Expr lhs = em.mkExpr(kind::STRING_CONCAT, x, ab, y);
 // String concatenation: abc.z
 Expr rhs = em.mkExpr(kind::STRING_CONCAT, abc, z);
 // x.ab.y = abc.z
 Expr formula1 = em.mkExpr(kind::EQUAL, lhs, rhs);
 // Length of y: |y|
 Expr leny = em.mkExpr(kind::STRING_LENGTH, y);
 // |y| >= 0
 Expr formula2 = em.mkExpr(kind::GEQ, leny, em.mkConst(Rational(0)));
 // Regular expression: (ab[c-e]*f)|g|h
 Expr r = em.mkExpr(kind::REGEXP_UNION,
 em.mkExpr(kind::REGEXP_CONCAT,
 em.mkExpr(kind::STRING_TO_REGEXP, em.mkConst(String("ab"))),
 em.mkExpr(kind::REGEXP_STAR,
 em.mkExpr(kind::REGEXP_RANGE, em.mkConst(String("c")), em.mkConst(String("e")))),
 em.mkExpr(kind::STRING_TO_REGEXP, em.mkConst(String("f")))),
 em.mkExpr(kind::STRING_TO_REGEXP, em.mkConst(String("g"))),
 em.mkExpr(kind::STRING_TO_REGEXP, em.mkConst(String("h"))));
 // String variables
 Expr s1 = em.mkVar("s1", string);
 Expr s2 = em.mkVar("s2", string);
 // String concatenation: s1.s2
 Expr s = em.mkExpr(kind::STRING_CONCAT, s1, s2);
 // s1.s2 in (ab[c-e]*f)|g|h
 Expr formula3 = em.mkExpr(kind::STRING_IN_REGEXP, s, r);

Make a query: 

 Expr q = em.mkExpr(kind::AND,
   formula1,
   formula2,
   formula3);

Check the result: 

 Result result = smt.checkSat(q);
 std::cout << "CVC4 reports: " << q << " is " << result << "." << std::endl;
 if(result == Result::SAT) {
   std::cout << " x = " << smt.getValue(x) << std::endl;
   std::cout << " s1.s2 = " << smt.getValue(s) << std::endl;
 }

Java

The example can be found in examples/api/java/Strings.java.

Unsat Cores

The string solver supports the generation of unsatisfiable cores. As with other subsolvers though, you must enable proofs at configuration time, and then run CVC with "--dump-unsat-cores" flag.

References

Retrieved from "http://cvc4.cs.stanford.edu/w/index.php?title=Strings&oldid=5733"