Strings
This page is about strings in CVC4
Contents
Syntax
This document is for the SMT-Lib 2 format.
We highly recommend users to switch to SMT-Lib v2.5, instead of v2.0. The major difference is for escape sequences for string literals.
Syntax below is for CVC4 version >= 1.4. Version 1.3 only has partial support for syntax in this document.
This string solver has a full support of ASCII characters. For arbitrary alphabets, please refer to sequence (parametrized string) theory.
In compliance with SMT-Lib v2, only printable basic ASCII characters are allowed to be appeared natively in string literals. Other ASCII characters must be encoded as escape sequences.
The Theory of Strings (Quantifier-Free) logic symbol:
(set-logic QF_S)
The logic symbol is IMPORTANT to the Theory of String, and it has to be set up.
If the constraints contain more theories, please add them accordingly, e.g. if it contains BitVector, the symbol should be QF_SBV.
The Theory of Quantified Strings logic symbol:
(set-logic S)
Since the theory of strings is pretty new in CVC4, we are still working on the standards for syntax. If you have some comments or suggestions about CVC4 strings, please feel feel to email me: tianyi-liang@uiowa.edu
Options
To use the experimental functions (disabled by default in ALL_SUPPORTED mode):
(set-option :strings-exp true)
To use finite model finding mode (false by default):
(set-option :strings-fmf true)
The string finite model finding mode is much slower than the default mode. We highly recommend you NOT using it if it is not necessary.
To select the strategy of LB rule application: 0-lazy, 1-eager, 2-no (0 by default):
(set-option :strings-lb 1)
To set up string alphabet cardinality (256 by default, expert option):
(set-option :strings-alphabet-card n)
This is a reserved option for the extension of the sequence theory.
Escaped Character Literals for Strings
\0 … \9 | represents ASCII character 0 … 9, respectively |
\a, \b, \e, \f, \n, \r, \t, \v | represents its corresponding ASCII character (C++ convention) |
\ooo | matches an ASCII character, where ooo consists of (no more than) three digits that represent the octal character code (from 0 to 377). For example, \101 represents ‘A’, while “\437” represent a string with two characters “#7”( *important* ). |
\xNN | matches an ASCII character, where NN is a two-digit hexadecimal character code. NN has to be exactly two hex-digits. If not, an exception will be raised. |
The backslash character (\) : when followed by a character that is not recognized as an escaped character, matches that character. For example, \" matches a double quote(").
In CVC4 string literal output, a non-printable/extended ASCII character is printed in the format \xNN, where NN matches its ASCII character, except for \a, \b, \e, \f, \n, \r, \t, \v, which are printed directly.
Note: Escaped character literals are for version (> 1.3). They are not compatible with the string literal standards in SMT-Lib v2.
To be compliant with SMT-Lib, users are required to add another layer of escapes. For example, in v2.0, both \t and \\t mean the tab character, and both \\\t and \\\\t mean the two characters \ and t. In v2.5, only \t means the tab character, and \\t means the two characters \ and t. In v2.5, both \"" and "" means the character ". Please check the string literals section in SMT-Lib v2.5 standard for more details.
In string literals (for the string engine) that are following the SMT-Lib v2.5 specification, it is mandatory to escape \ (by \\) and " (by "") to prevent parse error.
Strings
To define a string variable:
(declare-fun x () String)
String Concatenation:
(str.++ s1 s2 ... sn)
where s1, s2, ..., and sn are string terms. String concatenation takes at least 2 arguments.
String Length:
(str.len s)
where s is a string term.
Character in String:
(str.at s i)
where s is a string term and i is a natural number. (see partial functions) The index is starting from 0.
Sub-String:
(str.substr s i j )
where s is a string term, i and j are natural numbers. (see partial functions)
Escaped Character Literals for Regular Expressions
Currently, it is for CVC format only. (coming soon)
Symbolic Regular Expression
Membership Constraint:
(str.in.re s r)
where s is a string term and r is a regular expression.
String to Regular Expression Conversion:
(str.to.re s)
where s is a string term. The statement turns a regular expression that only contains a string s.
Regular Expression Concatenation:
(re.++ r_1 r_2 ... r_n)
where r_1, r_2, ..., r_n are regular expressions.
Regular Expression Alternation:
(re.union r_1 r_2 ... r_n)
where r_1, r_2, ..., r_n are regular expressions. re.or is for releases before March, 2014.
Regular Expression Intersection:
(re.inter r_1 r_2 ... r_n)
where r_1, r_2, ..., r_n are regular expressions. re.itr is for releases before March, 2014.
Regular Expression Kleene-Star:
(re.* r)
where r is a regular expression.
Regular Expression Kleene-Cross:
(re.+ r)
where r is a regular expression.
Regular Expression Option:
(re.opt r)
where r is a regular expression.
Regular Expression Range:
(re.range s t)
where s, t are single characters in double quotes, e.g. "a", "b". It returns a regular expression that contains any character between s and t.
Regular Expression Loop:
(re.loop r l u)
where r is a regular expression, l is a non-negative constant integer, and u is a non-negative constant integer. It returns a regular expression that contains at least l repetitions of r and at most u repetitions of r. If l >= u, it returns exactly l repetitions of r.
Regular Expression Loop-2:
(re.loop r l)
where r is a regular expression, and l is a non-negative constant integer. It returns a regular expression that contains at least l repetitions of r.
The Empty Regular Expression:
re.nostr
The Regular Expression that contains all characters:
re.allchar
Experimental Mode
Following functions are under the --strings-exp option. They are under active refinement. Once they are stable, we will move them to the default mode. Please let us know when you have some suggestions.
String Char-At:
(str.at s i)
where s is a string term and i is an integer term. i is the position. See partial functions section.
String Sub-string:
(str.substr s i j)
where s is a string term and i, j are integer terms. i is the starting position, and j is the offset. See partial functions section.
String Contain:
(str.contains s t)
where s and t are string terms. It returns true if the string s contains the string t. This function determines whether the string t can be found within the string s, returning true or false as appropriate.
String IndexOf:
(str.indexof s t i)
where s is a string, t is a non-empty string and i is a non-negative integer. This function returns the position of the first occurrence of the specified value t in the string s after the index i. It returns -1 if the value to search for never occurs.
String Replacement:
(str.replace s t1 t2)
where s, t1 and t2 are string terms, t1 is non-empty. This function searches the string s for the specified value t1, and returns a new string where the first occurrence of the specified value t1 is replaced by the string t2.
String PrefixOf:
(str.prefixof s t)
where s and t are string terms. It returns true if the string s is a prefix of the string t.
String SuffixOf:
(str.suffixof s t)
where s and t are string terms. It returns true if the string s is a suffix of the string t.
String To Integer Conversion:
(str.to.int s)
where s is a string term. It returns the corresponding natural number if s is valid; otherwise, it returns -1.
Integer To String Conversion:
(int.to.str i)
where i is an integer term. It returns the corresponding string if i is a natural number; otherwise, it returns an empty string.
Partial Functions
By the definition of partial functions in SMT-Lib Document, the following constraint is satisfiable:
(assert (= (str.substr "a" 2 10) "b"))
However, the following constraints are unsatisfiable:
(assert (= (str.substr "a" 2 1) "b")) (assert (= (str.substr "a" 2 1) "c"))
To achieve a desirable goal, it requires users to guard proper conditions. For example,
(assert (= (str.at x j) "b")) (assert (> j 0)) (assert (> (str.len x) j))
Extension
Together with other engine in CVC4, we can extend new functionality in the theory of strings. For example,
(define-fun fun1 ((?x String) (?s String)) Bool (or (= ?x ?s) (> (str.len ?x) (str.len ?s)) ))
Quantifiers over bounded Integers (with strings in the body) are supported in the experimental mode; however, quantifiers over strings are still under development.
Limitation
The decidability of this theory is unknown. For satisfiable problems (without extensions), our solver is sound, complete and terminating in the FMF mode (although the FMF mode will be slower than the default mode in general). For unsatisfiable problems, the termination is not guaranteed; however, user can tune the options for termination.
Current version supports ASCII characters only. We will move on to UNICODE in the future version.
Examples
Find an assignment for x, where x."ab"="ba".x and the length of x equals to 7.
(set-logic QF_S) (declare-fun x () String) (assert (= (str.++ x "ab") (str.++ "ba" x))) (assert (= (str.len x) 7)) (check-sat)
Find assignments for x and y, where x and y are distinct and their lengths are equal.
(set-logic QF_S) (declare-fun x () String) (declare-fun y () String) (assert (not (= x y))) (assert (= (str.len x) (str.len y))) (check-sat)
Find assignments for x and y, where x.y != y.x.
(set-logic QF_S) (declare-fun x () String) (declare-fun y () String) (assert (not (= (str.++ x y) (str.++ y x)))) (check-sat)
Find a model for x, y and z, where x."ab".y=y."ba".z and z=x.y and x."a"!="a".x.
(set-logic QF_S) (declare-fun x () String) (declare-fun y () String) (declare-fun z () String) (assert (= (str.++ x "ab" y) (str.++ y "ba" z))) (assert (= z (str.++ x y))) (assert (not (= (str.++ x "a") (str.++ "a" x)))) (check-sat)
Find a model for x and y, where both x and y are in the RegEx (a*b)* and they are different but have the same length.
(set-logic QF_S) (set-option :strings-fmf true) (declare-fun x () String) (declare-fun y () String) (assert (str.in.re x (re.* (re.++ (re.* (str.to.re "a") ) (str.to.re "b") )))) (assert (str.in.re y (re.* (re.++ (re.* (str.to.re "a") ) (str.to.re "b") )))) (assert (not (= x y))) (assert (= (str.len x) (str.len y))) (check-sat)