User Manual

This manual includes lots of information about how to use CVC4.

It is a work in-progress.

What is CVC4?

CVC4 is the last of a long line of SMT solvers that started with SVC and includes CVC, CVC-Lite and CVC3. Technically, it is an automated validity checker for a many-sorted (i.e., typed) first-order logic with built-in theories. The current built-in theories are the theories of:

• equality over free (aka uninterpreted) function and predicate symbols,
• real and integer linear arithmetic (with some support for non-linear arithmetic),
• bit vectors,
• arrays,
• tuples,
• records,
• user-defined inductive data types.

CVC4 checks whether a given formula $\phi$ is valid in the built-in theories under a given set $\Gamma$ of assumptions, a context. More precisely, it checks whether

$\Gamma\models_T \phi$

that is, whether $\phi$ is a logical consequence in $T$ of the set of formulas $\Gamma$, where $T$ is the union of CVC4's built-in theories.

Roughly speaking, when $\phi$ is a universal formula and $\Gamma$ is a set of existential formulas (i.e., when $\phi$ and $\Gamma$ contain at most universal, respectively existential, quantifiers), CVC4 is a decision procedure: it is guaranteed (modulo bugs and memory limits) to return a correct "valid" or "invalid" answer eventually. In all other cases, CVC4 is deductively sound but incomplete: it will never say that an invalid formula is valid, but it may either never return or give up and return "unknown" for some formulas.

Currently, when CVC4 returns "valid" for a query formula $\phi$ under a context $\Gamma$ it provides no evidence to back its claim. Future versions will also return a proof certificate, a formal proof that $\Gamma'\models_T \phi$ for some subset $\Gamma'$ of $\Gamma$.

When CVC4 returns "invalid" it can return both a counter-example to $\phi$'s validity under the context $\Gamma$ and a counter-model. Both a counter-example and a counter-model are a set $\Delta$ of additional formulas consistent with $\Gamma$ in $T$, but entailing the negation of $\phi$. Formally:

$\Gamma \cup \Delta \not\models_T \mathit{false}$ and $\Gamma \cup \Delta \models_T \lnot \phi$.

The difference is that a counter-model is given as a set of equations providing a concrete assignment of values for the free symbols in $\Gamma$ and $\phi$ (see the section on CVC4's native input language for more details).

Obtaining and compiling CVC4

CVC4 is distributed in the following ways:

• Binary packages
• Source packages
• Source repository checkout

Obtaining binary packages

Binary packages are available for CVC4. Nightly builds:

• Debian packages
• Optimized binaries (statically linked)
• Debug binaries (statically linked)

Obtaining source packages

Sources are available from the same site as the binaries.

Source repository

The CVC4 source repository is currently hosted by CIMS and requires a CIMS account. Please contact a member of the development team for access. Please see the additional instructions for #Building_CVC4 from_a_repository_checkout here.

Building from source

To compile from a source package:

1. Install antlr
2. Configure cvc4
3. Compile cvc4
4. Install cvc4 [optional]

   cd contrib
   ./get-antlr-3.4
   cd ..
   ./configure --with-antlr-dir=`pwd`/antlr-3.4 ANTLR=`pwd`/antlr-3.4/bin/antlr3
   make
   make check   [recommended]
   make install [optional]

(To build from a repository checkout, see here.)

For more detailed build instructions and dependencies see Building CVC4 from source

Using the CVC4 binary

The CVC4 driver binary ("cvc4"), once installed, can be executed directly to enter into interactive mode:

$ cvc4
cvc4 1.0 assertions:off
CVC4>

You can then enter commands into CVC4 interactively:

CVC4> OPTION "incremental";
CVC4> OPTION "produce-models";
CVC4> TRANSFORM 25*25;
625
CVC4> x, y : INT;
CVC4> QUERY x = y;
invalid
CVC4> COUNTERMODEL;
x : INT = -1;
y : INT = 0;
CVC4> ASSERT x >= 0;
CVC4> QUERY x = y;
invalid
CVC4> COUNTERMODEL;
x : INT = 0;
y : INT = 1;
CVC4>

The above example shows two useful options, incremental and produce-models.

• The incremental option allows you to issue multiple QUERY (or CHECKSAT) commands, and allows the use of the PUSH and POP commands. Without this option, CVC4 optimizes itself for a single QUERY or CHECKSAT command (though you may issue any number of ASSERT commands). The incremental option may also be given by passing the -i command line option to CVC4.
• The produce-models option allows you to query the model (here, with the COUNTERMODEL command) after an "invalid" QUERY (or "satisfiable" CHECK-SAT). Without it, CVC4 doesn't do the bookkeeping necessary to support model generation. The produce-models option may also be given by passing the -m command line option to CVC4.

So, if you invoke CVC4 with -im, you don't need to pass those options at all:

$ cvc4 -im
cvc4 1.0 assertions:off
CVC4> x, y : INT;
CVC4> QUERY x = y;
invalid
CVC4> COUNTERMODEL;
x : INT = -1;
y : INT = 0;
CVC4> ASSERT x >= 0;
CVC4> QUERY x = y;
invalid
CVC4> COUNTERMODEL;
x : INT = 0;
y : INT = 1;
CVC4>

By default, CVC4 operates in CVC-language mode. If you enter something that looks like SMT-LIB, it will suggest that you use the "--lang smt" command-line option for SMT-LIB mode:

CVC4> (declare-fun x () Int)
Parse Error: <shell>:1.7: In CVC4 presentation language mode, but SMT-LIB format detected.  Use --lang smt for SMT-LIB support.
CVC4>

Verbosity

CVC4 has various levels of verbosity. By default, CVC4 is pretty quiet, only reporting serious warnings and notices. If you're curious about what it's doing, you can pass CVC4 the -v option:

$ cvc4 -v file.smt2
Invoking: (set-logic AUFLIRA)
Invoking: (set-info :smt-lib-version 2.000000)
Invoking: (set-info :category "crafted")
Invoking: (set-info :status unsat)
Invoking: (declare-fun x () Real)
etc...

For even more verbosity, you can pass CVC4 an additional -v:

$ cvc4 -vv file.smt2
Invoking: (set-logic AUFLIRA)
Invoking: (set-info :smt-lib-version 2.000000)
Invoking: (set-info :category "crafted")
Invoking: (set-info :status unsat)
Invoking: (declare-fun x () Real)
etc...
expanding definitions...
constraining subtypes...
applying substitutions...
simplifying assertions...
doing static learning...
etc...

Internally, verbosity is just an integer value. It starts at 0, and with every -v on the command line it is incremented; with every -q, decremented. It can also be set directly. From CVC language:

CVC4> OPTION "verbosity" 2;

Or from SMT-LIB language:

CVC4> (set-option :verbosity 2)

Getting statistics

Statistics can be dumped on exit (both normal and abnormal exits) with the --statistics command line option.

$ cvc4 --statistics foo.smt2
sat
sat::decisions, 0
sat::propagations, 3
sat::starts, 1
theory::uf::TheoryUF::functionTermsCount, 2
theory::uf::TheoryUF::mergesCount, 2
theory::uf::TheoryUF::termsCount, 6
theory<THEORY_UF>::propagations, 1 
driver::filename, foo.smt2
driver::sat/unsat, sat
driver::totalTime, 0.02015373
[many others]

Many statistics name-value pairs follow, one comma-separated pair per line.

Exit status

The exit status of CVC4 depends on the last QUERY or CHECK-SAT. If you wish to call CVC4 from a program (e.g., a shell script) and care only about the satisfiability or validity of a single formula, you can pass the -q option (as described above, under verbosity) and check the exit code. With -q, CVC4 should not produce any output unless it encounters a fatal error.

QUERY asks a validity question, and CHECK-SAT a satisfiability question, and these are dual problems; hence the terminology is different, but really "sat" and "invalid" are the same internally, as are "unsat" and "valid":

Solver's last result	Exit code	Notes
sat or invalid	10
unsat or valid	20
unknown	0	could be for any reason: time limit exceeded, no memory, incompleteness..
no result	0	no query or check-sat command issued
parse errors	0 (in interactive mode) 1 (otherwise)	see below
other errors	1 (usually)	see below

Most "normal errors" return a 1 as the exit code, but out of memory conditions, and others, can produce different exit codes. In interactive mode, parse errors are ignored and the next line read; so in interactive mode, you may see an exit code of 0 even in the presence of such an error.

In SMT-LIB mode, an SMT-LIB command script that sets its status via "set-info :status" also affects the exit code. So, for instance, the following SMT-LIB script returns an exit code of 10 even though it contains no "check-sat" command:

(set-logic QF_UF)
(set-info :status sat)
(exit)

Without the "set-info," it would have returned an exit code of 0.

CVC4's native input language

The native input language consists of a sequence of symbol declarations and commands, each followed by a semicolon (;).

Any text after the first occurrence of a percent character and to the end of the current line is a comment:

%%% This is a native language comment

Type System

CVC4's type system includes a set of built-in types which can be expanded with additional user-defined types.

The type system consists of first-order types, subtypes of first-order types, and higher-order types, all of which are interpreted as sets. For convenience, we will sometimes identify below the interpretation of a type with the type itself.

First-order types consist of basic types and structured types. The basic types are $\mathrm{BOOLEAN}$, $\mathrm{REAL}$, $\mathrm{BITVECTOR}(n)$ for all $n > 0$, as well as user-defined basic types (also called uninterpreted types). The structured types are array, tuple, record types, and ML-style user-defined (inductive) datatypes.

Note: Currently, subtypes consist only of the built-in subtype $\mathrm{INT}$ of $\mathrm{REAL}$. Support for CVC3-style user-defined subtypes will be added in a later release.

Function types are the only higher-order types. More precisely, they are just second-order types since function symbols in CVC4, both built-in and user-defined, can take as argument or return only values of a first-order type.

Basic Types

The BOOLEAN Type

The $\mathrm{BOOLEAN}$ type is interpreted as the two-element set of Boolean values $\{\mathrm{TRUE},\; \mathrm{FALSE}\}$.

Note: CVC4's treatment of this type differs from CVC3's where $\mathrm{BOOLEAN}$ is used only as the type of formulas, but not as value type. CVC3 follows the two-tiered structure of classical first-order logic which distinguishes between formulas and terms, and allows terms to occur in formulas but not vice versa (with the exception of the IF-THEN-ELSE construct). CVC4 drops the distinction between terms and formulas and defines the latter just as terms of type $\mathrm{BOOLEAN}$. As such, formulas can occur as subterms of possibly non-Boolean terms.

Example:

[To do]

The REAL Type

The $\mathrm{REAL}$ type is interpreted as the set of real numbers.

Note that these are the (infinite precision) mathematical reals, not the floating point numbers. Support for floating point types is planned for future versions.

x, y : REAL;
QUERY (( x <= y ) AND ( y <= x )) => ( x = y );

The INT Type

The $\mathrm{INT}$ type is interpreted as the set of integer numbers and is considered as a subtype of $\mathrm{REAL}$. The latter means in particular that it is possible to mix integer and real terms in expressions without the need of an explicit upcasting operator.

Note that these are the (infinite precision) mathematical integers, not the finite precision machine integers used in most programming languages. The latter are models by bit vector types.

x, y : INT;
QUERY ((2 * x + 4 * y <= 1) AND ( y >= x)) => (x <= 0);
z : REAL;
QUERY (2 * x + z <= 3.5) AND (z >= 1);

Bit Vector Types

For every positive integer $n$, the type $\mathrm{BITVECTOR}(n)$ is interpreted as the set of all bit vectors of size $n$. A rich set of bit vector operators is supported.

User-defined Basic Types

Users can define new basic types (often referred to as uninterpreted types in the SMT literature). Each such type is interpreted as a set of unspecified cardinality but disjoint from any other type. User-defined basic types are created by declarations like the following:

% User declarations of basic types:

MyBrandNewType: TYPE;

Apples, Oranges: TYPE;

Structured Types

CVC4's structured types are divided in the following families.

Array Types

Array types are created by the mixfix type constructors $\mathrm{ARRAY}\ \_\ \mathrm{OF}\ \_$ whose arguments can be instantiated by any value type.

I : TYPE;

%% Array types:

% Arrays with indices from I and values from REAL
Array1: TYPE = ARRAY I OF REAL;

% Arrays with integer indices and array values 
Array2: TYPE = ARRAY INT OF (ARRAY INT OF REAL);

% Arrays with integer pair indices and integer values
IntMatrix: TYPE = ARRAY [INT, INT] OF INT;

An array type of the form $\mathrm{ARRAY}\ T_1\ \mathrm{OF}\ T_2$ is interpreted as the set of all total maps from $T_1$ to $T_2$. The main difference with the function type $T_1 \to T_2$ is that arrays, contrary to functions, are first-class objects of the language, that is, values of an array type can be arguments or results of functions. Furthermore, array types come equipped with an update operation.

Tuple Types

Tuple types are created by the mixfix type constructors

$\begin{array}{l} [\ \_\ ] \\[1ex] [\ \_\ ,\ \_\ ] \\[1ex] [\ \_\ ,\ \_\ \ ,\ \_\ ] \\[1ex] \ldots \end{array}$

whose arguments can be instantiated by any value type.

IntArray: TYPE = ARRAY INT OF INT;

% Tuple type declarations

RealPair: TYPE = [REAL, REAL]

MyTuple: TYPE = [ REAL, IntArray, [INT, INT] ];

A tuple type of the form $[T_1, \ldots, T_n]$ is interpreted as the Cartesian product $T_1 \times \cdots \times T_n$.

Note that while the types $(T_1, \ldots, T_n) \to T$ and $[T_1 \times \cdots \times T_n] \to T$ are semantically equivalent, they are operationally different in CVC4. The first is the type of functions that take $n$ arguments of respective type $T_1$, $\ldots$, $T_n$, while the second is the type of functions that take one argument of an $n$-tuple type.

Record Types

Similar to, but more general than tuple types, record types are created by type constructors of the form

$[\#\ l_1: \_\ ,\ \ldots\ ,\ l_n: \_\ \#]$

where $n > 0$, $l_1,\ldots, l_n$ are field labels, and the arguments can be instantiated with any first-order types.

MyType: TYPE;

% Record declaration

RecordType: TYPE = [# id: REAL, age: INT, info: MyType #];

The order of the fields in a record type is meaningful: permuting the field names gives a different type.

Note that record types are non-recursive. For instance, it is not possible to declare a record type called Person containing a field of type Person. Recursive types are provided in CVC4 by the more general inductive data types. (As a matter of fact, both record and tuple types are implemented internally as inductive data types.)

Inductive Data Types

Inductive data types in CVC4 are similar to inductive data types of functional languages. They can be parametric or not.

Non-Parametric Data Types

Non-parametric data types are created by declarations of the form

$\begin{array}{l} \mathrm{DATATYPE} \\ \begin{array}{ccc} \ \ A_1 & = & C_{1,1} \mid C_{1,2} \mid \cdots \mid C_{1,m_1}, \\ \ \ A_2 & = & C_{2,1} \mid C_{2,2} \mid \cdots \mid C_{2,m_2}, \\ \ \ \vdots & = & \vdots \\ \ \ A_n & = & C_{n,1} \mid C_{n,2} \mid \cdots \mid C_{n,m_n} \\ \end{array} \\ \mathrm{END}; \end{array}$

where each $A_i$ is a type name and each $C_{ij}$ is either a constant symbol or an expression of the form

$\mathit{cons}(\ \mathit{sel}_1: T_1,\ \ldots,\ \mathit{sel}_k: T_k\ )$

where $T_1, \ldots, T_k$ are any first-order types, including any $A_i$. Such declarations define the data types $A_1, \ldots, A_n$. For each data type $A_i$ they introduce:

• constructor symbols $cons$ of type $(T_1, \ldots, T_k) \to \mathit{type\_name}_i$,
• selector symbols $\mathit{sel}_j$ of type $\mathit{type\_name}_i \to T_j$, and
• tester symbols $\mathit{is\_cons}$ of type $\mathit{type\_name}_i \to \mathrm{BOOLEAN}$.

Note that permitting more than one data type to be defined in the same declarations allows the definition of mutually recursive types.

% simple enumeration type

% implicitly defined are the testers: is_red, is_yellow and is_blue
% (similarly for the other data types)

DATATYPE
  PrimaryColor = red | yellow | blue
END;


% infinite set of pairwise distinct values ..., v(-1), v(0), v(1), ...

DATATYPE
  Id = v (id: INT)
END;


% ML-style integer lists

DATATYPE
  IntList = nil | ins (head: INT, tail: IntList)
END;


% AST for lamba calculus

DATATYPE
  Term = var (index: INT)
       | apply (arg_1: Term, arg_2: Term)
       | lambda (arg: INT, body: Term)
END;


% Trees

DATATYPE
  Tree = tree (value: REAL, children: TreeList),
  TreeList = nil_tl
           | ins_tl (first_t1: Tree, rest_t1: TreeList)
END;

Constructor, selector and tester symbols defined for a data type have global scope. So, for example, it is not possible for two different data types to use the same name for a constructor.

An inductive data type is interpreted as a term algebra constructed by the constructor symbols over some sets of generators. For example, the type IntList defined above is interpreted as the set of all terms constructed with nil and ins over the integers.

Parametric Data Types

Parametric data types are infinite families of (non-parametric) data types with each family parametrized by one or more type variables. They are created by declarations of the form

$\begin{array}{l} \mathrm{DATATYPE} \\ \begin{array}{ccc} \ \ A_1[X_{1,1}, \ldots, X_{1,p_1}] & = & C_{1,1} \mid C_{1,2} \mid \cdots \mid C_{1,m_1}, \\ \ \ A_2[X_{2,1}, \ldots, X_{2,p_2}] & = & C_{2,1} \mid C_{2,2} \mid \cdots \mid C_{2,m_2}, \\ \ \ \vdots & = & \vdots \\ \ \ A_n[X_{n,1}, \ldots, X_{n,p_n}] & = & C_{n,1} \mid C_{n,2} \mid \cdots \mid C_{n,m_n} \\ \end{array} \\ \mathrm{END}; \end{array}$

where each $A_i$ is a type name parametrized by the type variables $X_{i,1}, \ldots, X_{i,p_i}$ and each $C_{ij}$ is either a constant symbol or an expression of the form

$\mathit{cons}(\ \mathit{sel}_1: T_1,\ \ldots,\ \mathit{sel}_k: T_k\ )$

where $T_1, \ldots, T_k$ are any first-order types, possibly parametrized by $X_1, \ldots, X_p$, including any $A_i$.

% Parametric pairs
DATATYPE [X, Y]
  Pair[X, Y] = pair (first: X, second: Y)
END;

% Parametric lists

DATATYPE [X]
  List[X] = nil | cons (head: X, tail: List[X])
END;


% Parametric trees using the list type above

DATATYPE [X]
  Tree[X] = node (value: X, children: List[Tree[X]]),
END;

The declarations above define infinitely many types of the form Pair[S,T], List[T] and Tree[T] where S and T are first-order types. Note that the identifier List above, for example, by itself does not denote a type. In contrast, the terms List[Real], List[List[Real]], List[Tree[INT]], and so on do.

Restriction to Inductive Types

By adopting a term algebra semantics, CVC4 allows only inductive data types, that is, data types whose values are essentially (labeled, ordered) finite trees. Infinite structures such as streams or even finite but cyclic ones such as circular lists are then excluded. For instance, none of the following declarations define inductive data types, and are rejected by CVC4:

DATATYPE
 IntStream = s (first:INT, rest: IntStream)
END;

DATATYPE
 RationalTree = node1 (child: RationalTree)
              | node2 (left_child: RationalTree, right_child:RationalTree)
END;

DATATYPE
  T1 =  c1 (s1: T2),
  T2 =  c2 (s2: T1)
END;

In concrete, a declaration of $n \geq 1$ datatypes $T_1, \ldots, T_n$ will be rejected if for any one of the types $T_1, \ldots, T_n$, it is impossible to build a finite term of that type using only the constructors of $T_1, \ldots, T_n$ and free constants of type other than $T_1, \ldots, T_n$.

Inductive data types are the only types where the user also chooses names for the built-in operations to:

• construct a value of the type (with the constructors),
• extract components from a value (with the selectors), or
• check if a value was constructed with a certain constructor or not (with the testers).

For all the other types, CVC4 provides predefined names for the built-in operations on the type.

Function Types

Function ($\to$) types are created by the mixfix type constructors

$\begin{array}{l} \_ \to \_ \\[1ex] (\ \_\ ,\ \_\ ) \to \_ \\[1ex] (\ \_\ ,\ \_\ ,\ \_\ ) \to \_ \\[1ex] \ldots \end{array}$

whose arguments can be instantiated by any first-order type.

% Function type declarations

UnaryFunType: TYPE = INT -> REAL;

BinaryFunType: TYPE = (REAL, REAL) -> ARRAY REAL OF REAL;

TernaryFunType: TYPE = (REAL, BITVECTOR(4), INT) -> BOOLEAN;

A function type of the form $(T_1, \ldots, T_n) \to T$ with $n > 0$ is interpreted as the set of all total functions from the Cartesian product $T_1 \times \cdots \times T_n$ to $T$.

The example above also shows how to introduce type names. A name like UnaryFunType above is just an abbreviation for the type $\mathrm{INT} \to \mathrm{REAL}$ and can be used interchangeably with it.

In general, any type defined by a type expression E can be given a name with the declaration:

name : TYPE = E;

Type Checking

In CVC4, formulas and terms are statically typed at the level of types (as opposed to subtypes) according to the usual rules of first-order many-sorted logic, with the main difference that formulas are just terms of type $BOOLEAN$:

• each variable has one associated first-order type,
• each constant symbol has one or more associated first-order types,
• each function symbol has one or more associated function types,
• the type of a term consisting just of a variable is the type associated to that variable,
• the type of a term consisting just of a constant symbol is the type associated to that constant symbol,
• the term obtained by applying a function symbol $f$ to the terms $t_1, \ldots, t_n$ is $T$ if $f$ has type $(T_1, \ldots, T_n) \to T$ and each $t_i$ has type $T_i$.

Attempting to enter an ill-typed term will result in an error.

Another significant difference with standard many-sorted logic is that some built-in symbols are parametrically polymorphic. For instance, the function symbol for extracting the element of any array has type $(\mathit{ARRAY}\ T_1\ \mathit{OF}\ T_2,\; T_1) \to T_2$ for all first-order types $T_1, T_2$.

Type Ascription

By the type inference rules above some terms might have more than one type. This can happen with terms built with polymorphic data type constructors that have more than one return type for the same input type. In that case, a type ascription operator (::) must be applied to the constructor to specify the intended return type.

DATATYPE [X]
  List[X] = nil | cons (head: X, tail: List[X])
END;

ASSERT y = cons(1, nil::List[REAL]);

DATATYPE [X, Y]
  Union[X, Y] = left(val_l: X) | right(val_r: Y)
END;

ASSERT y = left::Union[BOOLEAN, REAL](TRUE);

The constant symbol $\mathrm{nil}$ declared above has infinitely many types ($\mathrm{List}[\mathrm{REAL}]$, $\mathrm{List}[\mathrm{BOOLEAN}]$, $\mathrm{List}[[\mathrm{REAL}, \mathrm{REAL}]]$, $\mathrm{List}[\mathrm{List}[\mathrm{REAL}]]$, ...) CVC4's type checker requires the user to indicate explicitly the type of each occurrence of nil in a term. Similarly, the injection operator left has infinitely many return types for the same input type, for instance: $\mathrm{BOOLEAN} \to \mathrm{Union}[\mathrm{BOOLEAN}, \mathrm{REAL}]$, $\mathrm{BOOLEAN} \to \mathrm{Union}[\mathrm{BOOLEAN}, [\mathrm{REAL}, \mathrm{REAL}]]$, $\mathrm{BOOLEAN} \to \mathrm{Union}[\mathrm{BOOLEAN}, \mathrm{List}[\mathrm{REAL}]]$, and so on. Applications of left need to specify the intended returned typed, as shown above.

Terms and Formulas

In addition to type expressions, CVC4 has expressions for terms and for formulas (i.e., terms of type $\mathrm{BOOLEAN}$). By and large, these are standard first-order terms built out of typed variables, predefined theory-specific operators, free (i.e., user-defined) function symbols, and quantifiers. Extensions include an if-then-else operator, lambda abstractions, and local symbol declarations, as illustrated below. Note that these extensions still keep CVC4's language first-order. In particular, lambda abstractions are restricted to take and return only terms of a first-order type. Similarly, variables can only be of a first-order type.

A number of built-in function symbols (for instance, the arithmetic ones) are used as infix operators. All user-defined symbols are used as prefix ones.

User-defined, i.e., free, function symbols include constant symbols and predicate symbols, respectively nullary function symbols and function symbols with a $\mathrm{BOOLEAN}$ return type. These symbols are introduced with global declarations of the form $f_1, \ldots, f_m: T;$ where $m > 0$, $f_i$ are the names of the symbols and $T$ is their type:

% integer constants

a, b, c: INT;

% real constants

x, y, z: REAL;

% unary function

f1: REAL -> REAL;

% binary function

f2: (REAL, INT) -> REAL;

% unary function with a tuple argument

f3: [INT, REAL] -> BOOLEAN;

% binary predicate

p: (INT, REAL) -> BOOLEAN;

% Propositional "variables"

P, Q; BOOLEAN;

Like type declarations, function symbol declarations like the above have global scope and must be unique. In other words, it is not possible to declare a function symbol globally more than once in the same lexical scope. This entails among other things that globally-defined free symbols cannot be overloaded with different types and that theory symbols cannot be redeclared globally as free symbols.

Global symbol definitions

As with types, a function symbol can be defined as the name of another term of the corresponding type. With constant symbols, this is done with a declaration of the form $f:T = t;$ :

c: INT;

i: INT = 5 + 3*c;  % i is effectively a shorthand for 5 + 3*c

j: REAL = 3/4;

t: [REAL, INT] = (2/3, -4);

r: [# key: INT, value: REAL #] = (# key := 4, value := (c + 1)/2 #);

f: BOOLEAN = FORALL (x:INT): x <= 0 OR x > c ;

A restriction on constants of type $\mathit{BOOLEAN}$ is that their value can only be a closed formula, that is, a formula with no free variables.

A term and its name can be used interchangeably in later expressions. Named terms are often useful for shared subterms (terms used several times in different places) since their use can make the input exponentially more concise. Named terms are processed very efficiently by CVC4. It is much more efficient to associate a complex term with a name directly rather than to declare a constant and later assert that it is equal to the same term. This point is explained in more detail later in section Commands.

More generally, in CVC4 one can associate a term to function symbols of any arity. For non-constant function symbols this is done with a declaration of the form

$f:(T_1, \ldots, T_n) \to T = \mathrm{LAMBDA}(x_1:T_1, \ldots, x:T_n): t\;;$

where $t$ is any term of type $T$ with free variables in $\{x_1, \ldots, x_n\}$. The lambda binder has the usual semantics and conforms to the usual lexical scoping rules: within the term $t$ the declaration of the symbols $x_1, \ldots, x_n$ as local variables of respective type $T_1, \ldots, T_n$ hides any previous declarations of those symbols that are in scope.

As a general shorthand, when $k$ consecutive types $T_i, \ldots, T_{i+k-1}$ in the lambda expression $\mathrm{LAMBDA}(x_1:T_1, \ldots, x:T_n): t$ are identical, the syntax $\mathrm{LAMBDA}(x_1:T_1, \ldots, x_i,\ldots, x_{i+k-1}:T_i,\ldots, x:T_n): t$ can also be used.

% Global declaration of x as a unary function symbol

x: REAL -> REAL;

% Local declarations of x as variable (hiding the global one)

f: REAL -> REAL = LAMBDA (x: REAL): 2*x + 3;

p: (INT, INT) -> BOOLEAN = LAMBDA (x,i: INT): i*x - 1 > 0;

g: (REAL, INT) -> [REAL, INT] = LAMBDA (x: REAL, i:INT): (x + 1, i - 3);

Note that lambda definitions are not recursive: the symbol being defined cannot occur in the body of the lambda term. They should be understood as macros. For instance, any occurrence of the term $f(t)$ where $f$ is as defined above will be treated as if it was the term $(2*t + 3)$.

Local symbol definitions

Constant and function symbols can also be declared locally anywhere within a term by means of a let binder. This is done with a declaration of the form

$\mathrm{LET}\ f = t \ \mathrm{IN}\ t' ;$

where $t$ is a term with no free variables, possibly a lambda term. Let binders can be nested arbitrarily and follow the usual lexical scoping rules. The following general form

$\mathrm{LET}\ f_1 = t_1, f_2 = t_2, \ldots, f_n = t_m \ \mathrm{IN}\ t ;$

can be use above can used as a shorthand for

$\mathrm{LET}\ f_1 = t_1\ \mathrm{IN}\ \mathrm{LET}\ f_2 = t_2\ \mathrm{IN}\ \ldots \ \mathrm{LET}\ f_n = t_m \ \mathrm{IN}\ t ;$

t: REAL =
  LET x1 = 42,
      g = LAMBDA(x:INT): x + 1,
      x2 = 2*x1 + 7/2
  IN
     (LET x3 = g(x1) IN x3 + x2) / x1;

Note that the same symbol = is used, unambiguously, in the syntax of global declarations, let declarations, and as a predicate symbol.

Note: A $\mathrm{LET}$ term with a multiple symbols defines them sequentially. A parallel version of the $\mathrm{LET}$ construct will be introduced in a later version.

Built-in theories and their symbols

In addition to user-defined symbols, CVC4 terms can use a number of predefined symbols: the logical symbols, such as $\mathrm{AND}$, $\mathrm{OR}$, etc., as well as theory symbols, function symbols belonging to one of the built-in theories. They are described next, with the theory symbols grouped by theory.

Logical Symbols

The logical symbols in CVC4's language include the equality and disequality predicate symbols, respectively written as = and /=, the multiarity disequality symbol $\mathrm{DISTINCT}$, together with the logical constants $\mathrm{TRUE}$, $\mathrm{FALSE}$, the connectives $\mathrm{NOT}$, $\mathrm{AND}$, $\mathrm{OR}$, $\mathrm{XOR}$, $\Rightarrow$, $\Leftrightarrow$, and the first-order quantifiers $\mathrm{EXISTS}$ and $\mathrm{FORALL}$, all with the standard many-sorted logic semantics.

The binary connectives have infix syntax and type $(\mathrm{BOOLEAN},\mathrm{BOOLEAN}) \to \mathrm{BOOLEAN}$. The symbols = and /=, which are also infix, are instead parametrically polymorphic, having type $(T,T) \to \mathrm{BOOLEAN}$ for every first-order type $T$. They are interpreted respectively as the identity relation and its complement.

The DISTINCT symbol is both overloaded and polymorphic. It has type $(T,...,T) \to \mathrm{BOOLEAN}$ for every sequence $(T,...,T)$ of length $n > 0$ and first-order type $T$. For each $n > 0$, it is interpreted as the relation that holds exactly for tuples of pairwise distinct elements.

The syntax for quantifiers is similar to that of the lambda binder.

Here is an example of a formula built just of these logical symbols and variables:

A, B: TYPE;

q: BOOLEAN = FORALL (x,y: A, i,j,k: B): 
               i = j AND i /= k => EXISTS (z: A): x /= z OR z /= y;

Binding and scoping of quantified variables follows the same rules as in let expressions. In particular, a quantifier will shadow in its scope any constant and function symbols with the same name as one of the variables it quantifies:

A: TYPE;
i, j: INT;

% The first occurrence of i and of j in f are constant symbols,
% the others are variables.

f: BOOLEAN =  i = j AND FORALL (i,j: A): i = j OR i /= j;

Optionally, it is also possible to specify instantiation patterns for quantified variables. The general syntax for a quantified formula $\psi$ with patterns is

$Q\;(x_1:T_1, \ldots, x_k:T_k):\; p_1: \ldots\; p_n:\; \varphi$

where $n \geq 0$, $Q$ is either $\mathrm{FORALL}$ or $\mathrm{EXISTS}$, $\varphi$ is a term of type $\mathrm{BOOLEAN}$, and each of the $p_i$'s, a pattern for the quantifier $Q\;(x_1:T_1, \ldots, x_k:T_k)$, has the form

$\mathrm{PATTERN}\; (t_1, \ldots, t_m)$

where $m > 0$ and $t_1, \ldots, t_m$ are arbitrary binder-free terms (no lets, no quantifiers). Those terms can contain (free) variables, typically, but not exclusively, drawn from $x_1, \ldots, x_k$. (Additional variables can occur if $\psi$ occurs in a bigger formula binding those variables.)

A: TYPE;
b, c: A;
p, q: A -> BOOLEAN;
r: (A, A) -> BOOLEAN;

ASSERT FORALL (x0, x1, x2: A):
         PATTERN (r(x0, x1), r(x1, x2)): 
         (r(x0, x1) AND r(x1, x2)) => r(x0, x2) ;

ASSERT FORALL (x: A):
         PATTERN (r(x, b)): 
         PATTERN (r(x, c)): 
         p(x) => q(x) ;

ASSERT EXISTS (y: A):
         FORALL (x: A):
           PATTERN (r(x, y), p(y)): 
           r(x, y) => q(x) ;

Patterns have no logical meaning: adding them to a formula does not change its semantics. Their purpose is purely operational, as explained in the Instantiation Patterns section.

In addition to these constructs, CVC4 also has a general mixfix conditional operator of the form

$\mathrm{IF}\ b\ \mathrm{THEN}\ t\ \mathrm{ELSIF}\ b_1\ \mathrm{THEN}\ t_1\ \ldots\ \mathrm{ELSIF}\ b_n\ \mathrm{THEN}\ t_n\ \mathrm{ELSE}\ t_{n+1}\ \mathrm{ENDIF}$

with $n \geq 0$ where $b, b_1, \ldots, b_n$ are terms of type $\mathrm{BOOLEAN}$ and $t, t_1, \ldots, t_n, t_{n+1}$ are terms of the same first-order type $T$:

% Conditional term
x, y, z, w: REAL;

t: REAL = 
  IF x > 0 THEN y
  ELSIF x >= 1 THEN z
  ELSIF x > 2 THEN w
  ELSE 2/3 ENDIF;

User-defined Functions and Types

The theory of user-defined functions,also know in the SMT literature as the theory Equality over Uninterpreted Functions, or EUF, is in effect a family of theories of equality parametrized by the basic types and the free symbols a user can define during a run of CVC4.

This theory has no built-in symbols (other than the logical ones). Its types consist of all and only the user-defined types. Its function symbols consist of all and only the user-defined free symbols.

Arithmetic

The real arithmetic theory has two types: $\mathrm{REAL}$ and $\mathrm{INTEGER}$ with the latter a subtype of the first. Its built-in symbols for the usual arithmetic constants and operators over the type $\mathrm{REAL}$, each with the expected type: all numerals 0, 1, ..., as well as - (both unary and binary), +, *, /, <, >, <=, >=. Application of the binary symbols are in infix form. Note that + is only binary, and so an expression such as +4 is ill-formed.

Rational values can be expressed in decimal or fractional format, e.g., 0.1, 23.243241, 1/2, 3/4, and so on. A leading 0 is mandatory for decimal numbers smaller than one (e.g., the syntax .3 cannot be used as a shorthand for 0.3). However, a trailing 0 is not required for decimals that are whole numbers (e.g., 3. is allowed as a shorthand for 3.0). The size of the numerals used in the representation of natural and rational numbers is unbounded; more accurately, bounded only by the amount of available memory.

Arrays

The theory of arrays is a parametric theory of (total) unary maps. It comes equipped with mixfix polymorphic selection and update operators, respectively

$\_[\_]$ and $\_\ \mathrm{WITH}\ [\_]\ := \_$ .

The semantics of these operators is the expected one: for all first-order types $T_1$ and $T_2$, if $a$ is of type $\mathrm{ARRAY}\ T_1 \mathrm{OF}\ T_2$, $i$ is of type $T_1$, and $v$ is of type $T_2$,

• $a[i]$ denotes the value that $a$ associates to index $i$,
• $a\ \mathrm{WITH}\ [i]\ := v$ denotes a map that associates $v$ to index $i$ and is otherwise identical to $a$.

Sequential updates can be chained with the shorthand syntax $\_\ \mathrm{WITH}\ [\_]\ := \_, \ldots, [\_]\ := \_$.

A: TYPE = ARRAY INT OF REAL;
a: A;
i: INT = 4;

% selection:

elem: REAL = a[i];

% update

a1: A = a WITH [10] := 1/2;

% sequential update 
% (syntactic sugar for (a WITH [10] := 2/3) WITH [42] := 3/2)

a2: A = a WITH [10] := 2/3, [42] := 3/2;

Since arrays are just maps, equality between them is extensional, that is, for two arrays of the same type to be different they have to map at least one index to differ values.

Data types

The theory of inductive data types is in fact a family of theories parametrized by a data type declaration specifying constructors and selectors for one or more user-defined data types.

No built-in operators other than equality and disequality are provided for this family in the native language. Each user-provided data type declaration, however, generates constructor, selector and tester operators as described in the Inductive Data Types section.

Tuples and Records

Semantically both records and tuples can be seen as special instances of inductive data types. CVC4 implements them internally indeed as data types. In essence, a record type $[\#\ l_0:T_0, \ldots, l_n:T_n\ \#]$ is encoded as a data type of the form

$\begin{array}{l} \mathrm{DATATYPE} \\ \ \ \mathrm{Record} = \mathit{rec}(l_0:T_0, \ldots, l_n:T_n) \\ \mathrm{END}; \end{array}$

Tuples of length $n$ are in turn special cases of records whose field names are the numerals from $0$ to $n-1$.

Externally, tuples and records have their own syntax for constructor and selector operators.

• Records of type $[\#\ l_0:T_0, \ldots, l_n:T_n\ \#]$ have the associated record constructor $(\#\ l_0 := \_,\; \ldots,\; l_n := \_\ \#)$ whose arguments must be terms of type $T_0, \ldots, T_n$, respectively.
• Tuples of type $[\ T_0, \ldots, T_n\ ]$ have the associated tuple constructor $(\ \_,\; \ldots,\; \_\ )$ whose arguments must be terms of type $T_0, \ldots, T_n$, respectively.

The selector operators on records and tuples follows a dot notation syntax.

% Record construction and field selection
Item: TYPE = [# key: INT, weight: REAL #];

x: Item = (# key := 23, weight := 43/10 #);
k: INT = x.key;
v: REAL = x.weight;

% Tuple construction and projection
y: [REAL, INT, REAL] = ( 4/5, 9, 11/9 );
first_elem: REAL = y.0;
third_elem: REAL = y.2;

Differently from data types, records and tuples are also provided with built-in update operators similar in syntax and semantics to the update operator for arrays. More precisely, for each record type $[\#\ l_0:T_0, \ldots, l_n:T_n\ \#]$ and each $i=0, \ldots, n$, CVC4 provides the operator

$\_\ \mathrm{WITH}\ .l_i\ := \_$

The operator maps a record $r$ of that type and a value $v$ of type $T_i$ to the record that stores $v$ in field $l_i$ and is otherwise identical to $r$. Analogously, for each tuple type $[T_0, \ldots, T_n]$ and each $i=0, \ldots, n$, CVC4 provides the operator

$\_\ \mathrm{WITH}\ .i\ := \_$

with similar semantics.

% Record updates

Item: TYPE = [# key: INT, weight: REAL #];

x:  Item = (# key := 23, weight := 43/10 #);

x1: Item = x WITH .weight := 48;

% Tuple updates

Tup: TYPE = [REAL,INT,REAL];
y:  Tup = ( 4/5, 9, 11/9 );
y1: Tup = y WITH .1 := 3; 

Updates to a nested component can be combined in a single WITH operator:

Cache: TYPE = ARRAY [0..100] OF [# addr: INT, data: REAL #];
State: TYPE = [# pc: INT, cache: Cache #];

s0: State;
s1: State = s0 WITH .cache[10].data := 2/3;

Note that, differently from updates on arrays, tuple and record updates are just additional syntactic sugar. For instance, the record x1 and tuple y1 defined above could have been equivalently defined as follows:

% Record updates

Item: TYPE = [# key: INT, weight: REAL #];

x:  Item = (# key := 23, weight := 43/10 #);

x1: Item = (# key := x.key,  weight := 48 #);

% Tuple updates

Tup: TYPE = [REAL,INT,REAL];
y:  Tup = ( 4/5, 9, 11/9 );
y1: Tup = ( y.0, 3, y.1 );

Commands

In addition to declarations of types and function symbols, the CVC4 native language contains the following commands:

• $\mathrm{ASSERT}\ F$ -- Add the formula $F$ to the current logical context $\Gamma$.
• $\mathrm{CHECKSAT}\ F$ -- Check if the formula $F$ is satisfiable in the current logical context ($\Gamma \not\models_T \mathrm{NOT}\ F$).
• $\mathrm{CONTINUE}$ -- After an invalid $\mathrm{QUERY}$ or satisfiable $\mathrm{CHECKSAT}$, search for a counter-example different from the current one.
• $\mathrm{COUNTEREXAMPLE}$ -- After an invalid $\mathrm{QUERY}$ or satisfiable $\mathrm{CHECKSAT}$, print the context that is a witness for invalidity/satisfiability.
• $\mathrm{COUNTERMODEL}$ -- After an invalid $\mathrm{QUERY}$ or satisfiable $\mathrm{CHECKSAT}$, print a model that makes the formula invalid/satisfiable. The model is provided in terms of concrete values for each free symbol.
• $\mathrm{OPTION}\ o\ v$ -- Set the command-line option flag $o$ to value $v$. The argument $o$ is provide as a string literal enclosed in double-quotes and $v$ as an integer value.
• $\mathrm{POP}$ -- Equivalent to $\mathrm{POPTO}\ 1$
• $\mathrm{POPTO}\ n$ -- Restore the system to the state it was in right before the most recent call to $\mathrm{PUSH}$ made from stack level $n$. Note that the current stack level is printed as part of the output of the $\mathrm{WHERE}$ command.
• $\mathrm{PUSH}$ -- Save (checkpoint) the current state of the system.
• $\mathrm{QUERY}\ F$ -- Check if the formula $F$ is valid in the current logical context ($\Gamma\models_T F$).
• $\mathrm{RESTART}\ F$ -- After an invalid $\mathrm{QUERY}$ or satisfiable $\mathrm{CHECKSAT}$, repeat the check but with the additional assumption $F$ in the context.
• $\mathrm{PRINT}\ t$ -- Parse and print back the term $t$.
• $\mathrm{TRANSFORM}\ t$ -- Simplify the term $t$ and print the result.
• $\mathrm{WHERE}$ -- Print all the formulas in the current logical context $\Gamma$.

The remaining commands take a single argument, given as a string literal enclosed in double-quotes.

• $\mathrm{ECHO}\ s$ -- Print string $s$
• $\mathrm{INCLUDE}\ f$ -- Read commands from file $f$.
• $\mathrm{TRACE}\ f$ -- Turn on tracing for the debug flag $f$.
• $\mathrm{UNTRACE}\ f$ -- Turn off tracing for the debug flag $f$.

Here, we explain some of the above commands in more detail.

QUERY

The command $\mathrm{QUERY}\ F$ invokes the core functionality of CVC4 to check the validity of the formula $F$ with respect to the assertions made thus far, which constitute the context $\Gamma$. The argument $F$ must be well typed term of type $\mathrm{BOOLEAN}$, as described in Terms and Formulas.

The execution of this command always terminates and produces one of three possible answers: valid, invalid, and unknown.

• A valid answer indicates that $\Gamma \models_T F$. After a query returning such an answer, the logical context $\Gamma$ is exactly as it was before the query.
• An invalid answer indicates that $\Gamma \not\models_T F$, that is, there is a model of the background theory $T$ that satisfies $\Gamma \cup \{\mathrm{NOT}\ F\}$. When $\mathrm{QUERY}\ F$ returns invalid, the logical context $\Gamma$ is augmented with a set $\Delta$ of ground (i.e., variable-free) literals such that $\Gamma\cup\Delta$ is satisfiable in $T$, but $\Gamma\cup\Delta\models_T \mathrm{NOT}\ F$. In fact, in this case $\Delta$ propositionally entails $\mathrm{NOT}\ F$, in the sense that, every truth assignment to the literals of $\Delta$ that satisfies $\Delta$ falsifies $F$. We call the new context $\Gamma\cup\Delta$ a counterexample for $F$.
• An unknown answer is similar to an invalid answer in that additional literals are added to the context which propositionally entail $\mathrm{NOT}\ F$. The difference in this case is that CVC4 cannot guarantee that $\Gamma\cup\Delta$ is actually satisfiable in $T$.

CVC4 may report unknown when the context or the query contains non-linear arithmetic terms or quantifiers. In all other cases, it is expected to be sound and complete, i.e., to report Valid if $\Gamma \models_T F$ and Invalid otherwise.

After an invalid (resp. unknown) answer, counterexamples (resp. possible counterexamples) can be obtained with a $\mathrm{WHERE}$, $\mathrm{COUNTEREXAMPLE}$, or $\mathrm{COUNTERMODEL}$ command.

Since the $\mathrm{QUERY}$ command may modify the current context, if one needs to check several formulas in a row in the same context, it is a good idea to surround every query by a $\mathrm{PUSH}$ and $\mathrm{POP}$ invocation in order to preserve the context:

PUSH;
QUERY <formula>;
POP;

CHECKSAT

The command $\mathrm{CHECKSAT}\ F$ behaves identically to $\mathrm{QUERY}\ \mathrm{NOT}\ F$.

RESTART

The command $\mathrm{RESTART}\ F$ can only be invoked after an invalid query. For example, in an interactive setting:

QUERY <formula>;

CVC4> invalid

RESTART <formula2>;

Functionally, the behavior of the above command sequence is identical to the following:

PUSH;
QUERY <formula>;
POP;
ASSERT <formula2>;
QUERY <formula>;

The advantage of using the $\mathrm{RESTART}$ command is that the first command sequence may be executed much more efficiently that the second. The reason is that with $\mathrm{RESTART}$ CVC4 will re-use what it has learned while answering the previous query rather than starting over from scratch.

COUNTERMODEL

[More]

COUNTEREXAMPLE

[More]

POPTO

[More]

Instantiation Patterns

CVC4 processes each universally quantified formula in the current context by adding instances of the formula obtained by replacing its universal variables with ground terms. Patterns restrict the choice of ground terms for the quantified variables, with the goal of controlling the potential explosion of ground instances. In essence, adding patterns to a formula is a way for the user to tell CVC4 to focus only on certain instances which, in the user's opinion, will be most helpful during a proof.

In more detail, patterns have the following effect on formulas that are found in the logical context or get added to it later while CVC4 is trying to prove the validity of some formula $F$.

If a formula in the current context starts with an existential quantifier, CVC4 Skolemizes it, that is, replaces it in the context with the formula obtained by substituting the existentially quantified variables by fresh constants and dropping the quantifier. Any patterns for the existential quantifier are simply ignored.

If a formula starts with a universal quantifier $\mathrm{FORALL}\; (x_1:T_1, \ldots, x_n:T_n)$, CVC4 adds to the context a number of instances of the formula, with the goal of using them to prove the query $F$ valid. An instance is obtained by replacing each $x_i$ with a ground term of the same type occurring in one of the formulas in the context, and dropping the universal quantifier. If $x_i$ occurs in a pattern $\mathrm{PATTERN}\; (t_1, \ldots, t_m)$ for the quantifier, it will be instantiated only with terms obtained by simultaneously matching all the terms in the pattern against ground terms in the current context $\Gamma$.

Specifically, the matching process produces one or more substitutions $\sigma$ for the variables in $(t_1, \ldots, t_m)$ which satisfy the following invariant: for each $i = 1, \ldots, m$, $\sigma(t_i)$ is a ground term and there is a ground term $s_i$ in $\Gamma$ such that $\Gamma \models_T \sigma(t_i) = s_i$. The variables of $(x_1:T_1, \ldots, x_n:T_n)$ that occur in the pattern are instantiated only with those substitutions (while any remaining variables are instantiated arbitrarily).

The Skolemized version or the added instances of a context formula may themselves start with a quantifier. The same instantiation process is applied to them too, recursively.

Note that the matching mechanism is not limited to syntactic matching but is modulo the equations asserted in the context. Because of decidability and/or efficiency limitations, the matching process is not exhaustive. CVC4 will typically miss some substitutions that satisfy the invariant above. As a consequence, it might fail to prove the validity of the query formula $F$, which makes CVC4 incomplete for contexts containing quantified formulas. It should be noted though that exhaustive matching, which can be achieved simply by not specifying any patterns, does not yield completeness anyway since the instantiation of universal variables is still restricted to just the ground terms in the context, whereas in general additional ground terms might be needed.

CVC4's support for the SMT-LIB language

SMT-LIB compliance

Every effort has been made to make CVC4 compliant with the SMT-LIB 2.0 standard (http://smtlib.org/). However, when parsing SMT-LIB input, certain default settings don't match what is stated in the official standard. To make CVC4 adhere more strictly to the standard, use the "--smtlib" command-line option. Even with this setting, CVC4 is somewhat lenient; some non-conforming input may still be parsed and processed.

Upgrading from CVC3 to CVC4

Features not supported by CVC4 (yet)

Type Correctness Conditions (TCCs)

Type Correctness Conditions (TCCs), and the checking of such, are not supported by CVC4 1.0. Thus, a function defined only on integers can be applied to REAL (as INT is a subtype of REAL), and CVC4 will not complain, but may produce strange results. For example:

 f : INT -> INT;
 ASSERT f(1/3) = 0;
 ASSERT f(2/3) = 1;
 CHECKSAT;
 % sat
 COUNTEREXAMPLE;
 % f : (INT) -> INT = LAMBDA(x1:INT) : 0;

CVC3 can be used to produce TCCs for this input (with the +dump-tcc option). The TCC can be checked by CVC3 or another solver. (CVC3 can also check TCCs while solving with +tcc.)

If you were using the text interfaces of CVC3

The native language of all solvers in the CVC family, referred to as the "presentation language," has undergone some revisions for CVC4. The most notable is that CVC4 does _not_ add counterexample assertions to the current assertion set after a SAT/INVALID result. For example:

 x, y : INT;
 ASSERT x = 1 OR x = 2;
 ASSERT y = 1 OR y = 2;
 ASSERT x /= y;
 CHECKSAT;
 % sat
 QUERY x = 1;
 % invalid
 QUERY x = 2;
 % invalid

Here, CVC4 responds "invalid" to the second and third queries, because each has a counterexample (x=2 is a counterexample to the first, and x=1 is a counterexample to the second). However, CVC3 will respond with "valid" to one of these two, as the first query (the CHECKSAT) had the side-effect of locking CVC3 into one of the two cases; the later queries are effectively querying the counterexample that was found by the first. CVC4 removes this side-effect of the CHECKSAT and QUERY commands.

CVC4 supports rational literals (of type REAL) in decimal; CVC3 did not support decimals.

CVC4 does not have support for the IS_INTEGER predicate.

Useful command-line options

Statistics

Statistics can be dumped on exit (both normal and abnormal exits) with the --statistics command line option.

Time and resource limits

CVC4 can be made to self-timeout after a given number of milliseconds. Use the --tlimit command line option to limit the entire run of CVC4, or use --tlimit-per to limit each individual query separately. Preprocessing time is not counted by the time limit, so for some large inputs which require aggressive preprocessing, you may notice that --tlimit does not work very well. If you suspect this might be the case, you can use "-vv" (double verbosity) to see what CVC4 is doing.

Time-limited runs are not deterministic; two consecutive runs with the same time limit might produce different results (i.e., one may time out and responds with "unknown", while the other completes and provides an answer). To ensure that results are reproducible, use --rlimit or --rlimit-per. These options take a "resource count" (presently, based on the number of SAT conflicts) that limits the search time. A word of caution, though: there is no guarantee that runs of different versions of CVC4 or of different builds of CVC4 (e.g., two CVC4 binaries with different features enabled, or for different architectures) will interpret the resource count in the same manner.

CVC4 does not presently have a way to limit its memory use; you may opt to run it from a shell after using "ulimit" to limit the size of the heap.

Proof support

CVC4 1.0 has limited support for proofs, and they are disabled by default. (Run the configure script with --enable-proof to enable proofs). Proofs are exported in LFSC format and are limited to the propositional backbone of the discovered proof (theory lemmas are stated without proof in this release).

Portfolio solving

If enabled at configure-time (./configure --with-portfolio), a second CVC4 binary will be produced ("pcvc4"). This binary has support for running multiple instances of CVC4 in different threads. Use --threads=N to specify the number of threads, and use --thread0="options for thread 0" --thread1="options for thread 1", etc., to specify a configuration for the threads. Lemmas are *not* shared between the threads by default; to adjust this, use the --filter-lemma-length=N option to share lemmas of N literals (or smaller). (Some lemmas are ineligible for sharing because they include literals that are "local" to one thread.)

Currently, the portfolio **does not work** with quantifiers or with the theory of inductive datatypes. These limitations will be addressed in a future release.

Emacs support

For a suggestion of editing CVC4 source code with emacs, see the file contrib/editing-with-emacs. For a CVC language mode (the native input language for CVC4), see contrib/cvc-mode.el.